My mother asked me to design her an apron not so long ago. Of course, I agreed. She needed it to be easy. “Straight lines only!” she said. I can do that. After all, most sewing involves straight lines.

She needed it to use as little material as possible, while still looking like a nice “vintage” half apron. Okay. Now is where it gets tricky. I knew I had made aprons using a yard of fabric. But could I use just half a yard? Yes. I most certainly could (and did). Here is my half yard apron design! (And thank you, Mother for the fabric!)

Cut Your Fabric

First, you are going to cut up your half yard of fabric, just a bit. You’ll need to cut 4 strips off the side of your half yard that are 18″ long and 3″ wide. You just cut off 12″ from the side of your half yard. The big piece is your apron body. Now, take one of those 18″ x 3″ strips and cut it in half. Now you have your apron body, three 18″ x 3″ strips, and two 9″ x 3″ strips. The strips will become your waist band.

Sewing The Waistband of the Half Yard Apron

Sew the three long strips together- end to end. (Right sides together, sew across the 3″ end) Now, you have a long strip. Sew a 9″ x 3″ strip to the ends. (If we kept it all together, the front waistband of your apron would have a seam in the middle. I like my front waistband to be nice and solid- thus the two smaller strips are the end. If you only use the 3 strips, without the extra 18″, you’ll be able to tie your apron only if you’re skinny. I made the first one with three 4″ strips, and I cold tie it, but couldn’t get it into a bow.)

Press your seams however you want. I do mine toward the ends. You can open them if you want. It is your apron.

Sew the Edges of the Main Body of the Half Yard Apron

Finish the sides and bottom of your apron body. You can do a double folded hem. Or you can do what I do and serge all the edges, then fold the serged part to the inside and hem. Either way, finish the sides first, then the bottom. (If you serge it, you can serge it all, then hem it sides first, then bottom.

Sew a basting stitch across the top of the apron body. (You’ll use it to gather the top of the apron body.) Don’t know how to do this? Sew a long straight stitch 1/4″ from the top of the apron body, leaving long tails of thread. Pull gently on one of the threads on one side at a time, gently working gathers into the top of the apron body.

Attaching the Waistband to the Half Yard Apron Body

Now, with the long strip you’ve got, press it with the raw edges tucked inside. (Think- double fold bias tape.) To do this, fold in half and press. Then tuck the outer raw edges to the inside seam and press again!

Turn your attention back to this gathered edge. You’re going to encase the raw edge of the gather into the double folded strip you just pressed.

Pin the edges of the apron body to the edges of the center section of the long strip/tie. You can stretch out your gathers or gather them more as needed to fit the section. Pin as needed. Try to eyeball and see that your gathers are evenly gathered and you don’t have a bare spot.

Sew along the edge of the double folded strip, catching the apron body, encasing the raw gathered edge. Start at the seam where the apron body is attaching. You’ll go back and finish the rest of that side later.

When you get to the end of the apron body, keep sewing. Sew all the way to the end of the tie.

Flip the apron over and finish the tie on the other side.

Finishing the Half Yard Apron

Tie a knot at the end of each tie.

And you’re done! And yes, my friends, that is me.

Enjoy your new apron. Or give it as a gift. Or sell it for some cash. Whatever.

Other Notes From the Parsonage Posts You Might Enjoy

• Child’s Ruffled Half Apron Sewing Tutorial
• Child’s Half Gardening Apron Tutorial
• Easiest Necktie Ever
• Half Yard Baby Shower Gift Tutorial

The post Half Yard Apron Sewing Tutorial appeared first on Notes From the Parsonage.

My little princess is always wanting to play “hostess.” Even when it is just our little family around. So, I designed this quick little ruffled hostess half apron for her. She NEEDED it! (My poor boys rarely get Mommy made stuff. But they don’t NEED this kind of cuteness.)

Cutting the Fabric for our Ruffled Half Apron

You’ll only need two fat quarters (and you’ll have some scraps leftover) to make a child’s size half apron with a long ruffle.

With your “main” fabric, you’ll just want to cut your fat quarter in half (making it 18″ wide by 11″ long). The other half of that fat quarter is scrap.

Take your contrast fabric, and cut it as follows. You’ll cut three 3″ strips (3″ x 18″). (If you would like a wider waistband, you can cut 4″ strips if you wish- you’ll have enough fabric for it.) Then you’ll cut two 5″ strips (5″ x 18″)- those will make your frilly little top!

Sewing the Ruffled Half Apron

Sew the 3″ strips together end to end (you can sew them on a diagonal if you are concerned with bulk- I just sew mine straight). You now have one long 3″ strip that will be your waistband and ties.

Sew the two 5″ strips together. This seam will not be hidden, so you’ll need to finish it. I did a french seam. It just “seamed” like the right thing to do. (ba- dum- ching!) Now you have a 5″ strip that is twice the width of your apron front. Finish the side and bottom edges of this strip. (Either do a double fold hem or serge and sew them to a nice finish.)

Finish the sides and bottom of your main skirt body. Do it in that order- sides then bottom. You can do a nice double fold hem. I serge my edges (because I have to use my serger for something) then fold the under and sew close to the edge.

Ruffling the Ruffle

Put a basting stitch into the top edge your ruffle (that 5″ strip that now has finished sides and bottom) so you can gather it.

If you’re new to sewing and don’t know what I’m talking about- a basting stitch is just a temporary stitch. Set your straight stitch on your sewing machine to the longest length you’ve got. You want to put it about a quarter of an inch from the top edge of the ruffle. Leave a long “tail” of thread at each end of the stitch. Pulling on just one string, slowly pull the thread to gather the fabric.

Add the Ruffle to the Body of the Half Apron

Pin your ruffle to the top on the apron body and sew together. You want your ruffle the same width as your apron body. This top unfinished edge will be encased inside the waistband- so don’t worry about finishing the edge.

Sewing the Waist and Ties

Take your 3″ strip and press it in half (long ways). Tuck the unfinished edges into the center and press again. (Think- double fold bias tape.) In the picture above, I am opening the creases so you can see.

Line the apron body up in the center of the waistband/tie. (You can use your seams as guides. The middle section should be about the right size for the apron body.) Pin the top of the apron body to the waistband. You’ll slip the upper unfinished edge of the apron body into the middle of the waistband, sandwiching it inside. Sew close to the lower edge (the one toward the apron body) of the waistband. Sew past the apron body to the end of the tie. Flip your apron over and finish the tie on the other side.

Tie a knot in the end of the tie.

Your Ruffled Half Apron is Done!

As usual, you can do what you like with your finished product of my design. Sell it. Swap it. Gift it. Keep it. I don’t mind. Just don’t take credit for the design itself. And for the love of free- share the design!

Other Notes from the Parsonage Posts You Might Enjoy

• Double Twirly Skirt Tutorial
• Crayon Wallet Tutorial
• Half Yard Baby Shower Gift Tutorial
• Child’s Half Gardening Apron Tutorial
• Wide Leg Ruffle Pants Tutorial

The post Child’s Ruffled Half Apron Sewing Tutorial appeared first on Notes From the Parsonage.

For the little lady’s birthday, she had a gardening party. I grabbed fabric to make her an outfit and then after her outfit was made, I realized I had lots of extra fabric. The boys were asking me if they got aprons, so I decided to make all the kids a half apron as a party favor. (They also got a little pot of lavender seeds they each planted.) Really, I’m not usually so crazy when it comes to parties. I blame pregnancy for making me do these things. The aprons are super easy to make. I made 12 with 1 yard of the blue dots, 1 yard of red dots, and 1/2 yard of each green solid and yellow solid. (And I did still have fabric leftover.)

Here is what you’ll need:

fabric

ribbon (I used random scraps I had.)

clips (I had a bunch of pacifier clips that I bought on Etsy.)

Cut your rectangle for the apron front 12-15″ wide (depending on what scraps you have) and 8-10″ tall. Cut the waistband 2″ x the width of the fabric. Cut a small length of ribbon to make a loop for the clip. (It can be anywhere from 4″-8″.)

First, finish the sides and the bottom of the apron panel.

Next, attach the looped ribbon with the clip attached to the top left of the apron panel. Just sew it close to the edge so the waistband will cover it.

Now, take your 2″ strip of fabric and iron in half. Tuck the cut ends toward the center and iron. (You now have double fold tape.) Line up the center of the strip with the apron panel. Sandwich the apron panel into the waistband strip. Sew along the open edge all the way to the end. (I start at the apron panel, sew to the end, then flip and sew from where I started to the other end.) Tie a knot in the end of the strip.

Done.

Clip a paper towel or rag to the clip when gardening for hand wiping.

Make these to give away, to use, to sell- just make sure you share the free tutorial!

The post Child’s Half Gardening Apron Tutorial appeared first on Notes From the Parsonage.