etsy Archives - Notes From the Parsonage

DIY Burp Cloths- Two Sizes

notesfromtheparsonage — Thu, 28 Mar 2024 02:00:11 +0000

This sewing tutorial will teach you to make DIY burp cloths in two sizes- a standard size and a mini size. The standard size are the typical burp cloth, only these will be the best burp cloths you’ve ever used! The mini size is sized to fit into a wipe warmer to have warm wet cloth wipes on hand or it is perfect to put in the diaper bag for wiping little noses and taking care of small messes.

Now, how do you make them?

Dimensions of DIY Burp Cloths

Standard Size- 10″ x 18″

Mini Size\- 10″ x 6″

The mini is a third of the size as the standard.

The Basics of DIY Burp Cloths

To make either size DIY burp cloth, simply cut two rectangles of fabric (we’ll discuss fabric selection in a minute) and sew them together with right sides together, leaving a hole to turn the item right side out.

(You can see the hole in the above photo on the upper edge.) Clip the corners so when you turn your item right side out, you’ll have corners rather than rounds.

Flip right side out, pushing the corners out. Sew around the edge again, all the way around. Sew close to the edge to close the hole. Overlap your stitches where you began.

(This entire process is very simply termed “turned and topstitched” or “T&T.” When you see this, you know the whole process is sew, flip, sew.)

Fabric Choice for DIY Burp Cloths

Now, let’s discuss the arduous task of choosing fabric! So, you can clearly use whatever you want, but I have tried several things and used them personally, so I really do know what works.

Woven Cotton with Terry Cloth

The best option based on absorbency is woven cotton on one side (quilting cotton) and terry cloth on the other side. You can buy the terry cloth by the yard, but the best absorbency is to buy cheap towels from the mega mart which shall remain unnamed. You go to MegaloMart and buy their cheapest towels. Cut the end strips off (unless you like that line across your DOY burp cloth) and cut them into appropriate sized rectangles. I have tried both terry by the yard and cheap towels and I can tell you that cheap towels make fluffier, more absorbent burp cloths. (And you’ll have a broader range of colors.) Burp Cloths made out of cotton and terry are cute and functional. They catch the biggest messes from the biggest spitters! They are awesome! The drawback is the bulk. They are pretty hefty and don’t fold up very small, which makes them boogers to stick a few in your diaper bag. There are also limited colors available. Yes, towels come in many colors, but you may have trouble finding exact matches.

Flannel Options

The next best option is flannel. You can use a woven cotton (quilting cotton) on one side and flannel on the other, or you can do both sides in flannel. Flannel is soft, thin, and absorbent. The flannel/flannel make awesome wipes in the mini size! (Flannel/bamboo velour make some super awesome wipes in the mini size- but that can be expensive!) Solid flannel comes in more colors that terry and even more than towels. Cotton/flannel burp cloths are perfect for stashing several in your diaper bag for emergency use. They also work well if you have a frequent spitter that doesn’t spit a lot each time. They fold down so easily. You can also use flannel on one side and terry on the other side, if you are so inclined. Flannel is much softer than the terry. Flannel is also really cheap!

Cotton Knits

You can also use a cotton knit in place of woven cotton. I tend to use woven cotton because it comes in so many prints and patterns. I can find so many cute fabrics. Knit on one side and terry on the other do make some awesome wipes in the mini size, though they can be a little rough (especially on little noses), but can clean poo off little butts like nobody’s business. You can also use knit on both sides, but they are hard to sew and are not my favorite. But if you have some old tees and need wipes, go ahead and use them to make a bunch of the mini size! (If you have a serger, you can just serge two layers of knits together instead of T&T.)

Woven Cotton with Chenille

I think chenille on one side and woven cotton on the other is the most beautiful and functional version of the DIY burp cloth. However, chenille is way more expensive than I want it to be. But to make a baby gift just that little bit *extra special* I will splurge because they are spectacular.

Bad Fabric Choices for Burp Cloths

You can use whatever you like, but there are a few things that I thought might be nice, but really suck when made into something you need to actually function!

Minky Fabrics

Don’t use minky. It sounds like a nice idea- a diy burp cloth with cotton on one side in an adorable pattern and super soft minky on the other. Well, it is gross when a kid pukes on the minky and it isn’t absorbed at all! It just sits there and you touch it and it is cold, then the baby rubs his face in it and he has puke all over his cute little face because minky does not absorb! Yes, the diy burp cloth is cute as can be. Yes, before the baby is born you run your hand over it and feel the softness and you get all mommy-eyed thinking about your soft, sweet baby cuddling up on your shoulder with this divine burp cloth you made. Then you use it once, have puke smeared everywhere on you and adorable baby, and you never pick that burp cloth again. Until your mother-in-law visits. *laughing* (That was a joke. I am not at all responsible for mothers-in-law getting covered in icky baby puke from a non-absorbent burp cloth!)

Fleece

The next fabric not to use is fleece. It seems like it’d be a nice choice. Many baby things are fleece. Fleece is soft and fluffy. Fleece comes in bazillions of colors. But let me inform you, fleece repels water. That is not a good feature for a burp cloth. (If you need liners for cloth diapers to keep diaper rash cream, bacitracin, or petroleum jelly off your diapers, fleece makes a good liner. Other than that, keep away from the fleece!)

So, go sew! Go ahead! Make DIY burp cloths in all the sizes for yourself, your friends, your neighbors, that person across the country that you don’t know but paid you to do so!

Plastic Bag Holder Tutorial

notesfromtheparsonage — Mon, 25 Sep 2023 02:08:38 +0000

This plastic bag holder tutorial is a simple, beginner sewing project! This is one bag to hold all your other bags. It’ll help you organize your space and add a bit of color while doing so. They also make really fun gifts!

A friend of mine asked if I could make her a plastic bag holder. Of course, I accepted! I looked online for a plastic bag holder tutorial or something. But none of them fit what I wanted it to look like. Most of them were just tubes with elastic at the top and bottom. Very basic. I usually like basic, but I thought it needed a little extra oomph!

So, I did what I do. I sat down with my graph paper and sketched out a plan. This plastic bag holder sewing tutorial is another fat quarter project! Yay! (Fat quarters are 18″ x 22″ pieces of fabric, sold at fabric stores that sell quilting fabric.)

I use reusable bags, but always end up with plastic grocery bags anyway! (You know how you forget sometimes– or Instacart brings you round a whole fresh crop of plastic bags!)

You could also use this bag to store other things. (I stuffed one with fabric scraps!)

Cutting the Fabric for Your Plastic Bag Holder

To make a plastic bag holder, you’ll need one fat quarter, a 4″ strip of a contrasting fabric, 2 small (4″ or so) pieces of elastic, and one small piece of ribbon (6″ or so). (You can also make a fabric “loop” to hang the bag by. It is up to you!)

Measure your fat quarter. It should be about 18″ x 22″, but sometimes they are slightly larger. You’ll want to cut your 4″ strip of contrast fabric so you have two 4″ strips to go across each 18″ side. If your fat quarter is 19″, then cut your strips 19″ to fit.

With the right sides together, sew the contrast strip to the main fabric along the 18″ edge. Repeat for the other side.

I serge all my edges, since I am usually selling what I make. If you’ve got a serger, go ahead and finish those edges. If you don’t have a serger, you can omit the finishing if you want, or you can pink or zig-zag the edge. Since this is not a wearable object, or an object that will get much washing (if any) it isn’t necessary to finish the edges at all. So, don’t feel bad if you choose to skip that step!

Ribbon or Fabric Loop to Hang Your Plastic Bag Holder

Pin your ribbon loop (or fabric loop) a couple inches from the top of the main fabric along the 22″ side. (Which is not a 30″ side, since you just attached two 4″ strips to the ends!) If you put your loop too high, you’ll be fighting it while you sew the elastic casing or it will end up on the ruffle. So, try to put it low enough it will be out of the way, but still at the top of the bag. (You can turn the top ruffle down and see where it will hit if that helps you. I just eyeball it and hope for the best!)

Fold your fabric in half long ways (with your contrast fabric on the top and bottom) and sew with right sides together. Serge or finish the edge as you did with the other seam!

Finishing the Top and Bottom of the Plastic Bag Holder

Serge the top and bottom edge of your contrast fabric (you can see above that the edge of the pink fabric is serged). If you want to skip that step, go right ahead!

Now, press the contrast edge in. (See above!) You want to leave about 1/2″ or so of your contrast fabric showing on the front.

(In the photo above, I am showing you the contrast fabric showing on the front.) Repeat for the opposite end. Press it down, leaving about 1/2″ (maybe a little more) showing on the front.

At this point, you’re bag is looking something like this. It reminds me of the cat tunnel project in In Stitches by Amy Butler. (Don’t know what project I’m referring to? It is a tube, much like this, lined with faux fur for your cat to play in.)

Now, we make our elastic casing! Yay! Sew along about 1/2″ from the edge of the contrast fabric. Then sew all the way around, sewing back over your first stitches.

Sew all the way around again, this time sewing as close to the edge as you can. Also, you’ll need to backstitch the ends and leave a small opening (preferably near the back center seam) to guide your elastic through.

Repeat for the other side! Now, you are almost done!

Adding Elastic to Plastic Bag Holder

Grab your two pieces of elastic!

Here is how I thread my elastic. I put a large safety pin along the back end. It keeps the elastic from slipping all the way through. (Believe me, that is a pain!) I attach a small safety pin to the front end (the end I’ll be pushing through the casing). Make sure your safety pins are firmly attached. It really sucks when a pin slips off because you put it too close to the edge.

Thread your elastic through the casing.

Sew your elastic together by overlapping it and sewing it with an “elastic” stitch. (The awkward looking zig-zag stitch on your machine that is more “lighting bolty” than “zig-zaggy.” If you don’t have that stitch, a small zig-zag will work. (You may have to reset the width of the zig-zag so it fits on the elastic.)

Repeat for the other side!

Flip and Fill Time

Flip it right side out an you’re done! I know, you’re wondering why I didn’t finish closing off those elastic casings! Well, to be honest, it is a pain in the butt and it serves no real purpose. You can fight through it and close them up if you’d like, but I see no reason to. I backstitched the ends, so I made sure it was nice and secure. The elastic is so tight, You’ll find great difficulty stretching it out to sew that little bitty hole closed. And I see no point in closing it. You can if you’d like, I don’t.

See the lovely loop on the back! You can hang it in your pantry or, if you’re like me, you can hang it on your kitchen wall! (Use some snazzy fabrics and you’ll liven your kitchen up!)

This is my favorite aspect of the design! The top and bottom “mouth” of your bag holder have a nice little flirty splash of contrast! I love it!

Go! Make some as gifts, for yourself, or sell some! (Yep. You can feel free to sell anything you make from any of my free designs.) As always, I just ask that you not take credit for the design and that you’d share the free tutorial with others! (No hoarding freeness!) Have fun!